Gold Member Since 2009
Audited Supplier
Dongyue Machinery Group Co., Ltd.

Aac Panel Production Line, Aac Panel Line, Fly Ash Aac Panel Line manufacturer / supplier in China, offering 50, 000-300, 000 Fly Ash AAC Panel Production Line, Small Concrete Block Making Machine|Semi Automatic Concrete Block Making Machine|Vacuum Brick Making Machine Qt4-25, Qt4-25 Semi Automatic Fly Ash Brick Making Machine and so on.

(/ )

Supplier Homepage Product AAC block production line 50, 000-300, 000 Fly Ash AAC Panel Production Line

50, 000-300, 000 Fly Ash AAC Panel Production Line

FOB Price: Get Latest Price
Min. Order: 1 Piece
Production Capacity: 20000PCS/Year
Transport Package: No
Payment Terms: L/C, T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: panel
  • Installation Service: Yes
  • Porduction Capacity: 50000m3--300000m3
  • Condition: New
  • Specification: ISO9001&CE
  • HS Code: 8474809090
  • Certification: ISO9001: 2000, CE, SGS
  • Workshop Area: 3000m2
  • Boiler: 4t
  • Trademark: DongYue
  • Origin: China
Product Description
50, 000-300, 000 fly ash aac panel production line

I. Fly ash aac panel production line Technology Certification and Evaluation
Our autoclaved aerated concrete panel production line comes with intellectual property rights. It has obtained the ISO9001 International Quality Management System Certificate and CE certificate. Also, our production line has been approved by BV and TUV.
II. Fly ash aac panel production lineTechnical Process
1. Rebar Mesh Cage Preparation
Use the straightening machine to process the steel bar coil into the type with the required length. With the welder, the processed steel bar will be welded into the steel meshes. Later, the suspending welder makes those meshed into the wanted cages. Next, the rebar mesh cage will be painted, and then dried in the drying box. Finally, it will be conveyed to the assembly area.
2. Mesh Cage Assembly and Drill Rod Plugging
During the assembly process, the mesh cage will be installed on to the cabinet frame according to the size. And then it will be fixed with the drill rod.
After the installation, the poured horizontal molding box will be transported to the designated spot. The dill rod plugging crane puts the mesh cage cabinet into the mould. Later, the cabinet will be sent to the curing room. Until the green bricks have been cut, the cured molding box will be then delivered to the place where drill rod is plugged. Pull out the drill rods, and transport the molding box to the cutting place.
3. Batching, Pouring, Curing (Refer to the Autoclaved Aerated Concrete Block Production Line)
III. Fly ash aac panel production line Application of Autoclaved Aerated Concrete Panel
ALC autoclaved aerated concrete panel can be divided in to the partition plate, external wall plate, roof panel, fire-proof board, etc. All those panels are mainly used for concrete or steel buildings.
A. ALC Internal Wall Panel
This internal wall panel is applicable for all kinds of buildings, for instance, hotels, schools, etc. On the wall panel, you can install the air conditioning, heater, and the like.
B. ALC External Wall Panel
This type of wall panel features excellent heat preservation, heat insulation performance. Therefore, it is thinner than general type autoclaved aerated concrete panel. This product can satisfy many countries' applications where heat insulation is required.
Characteristics and Advantage
In comparison with the autoclaved aerated concrete block, AAC or ALC panel has the characteristics as following:
A. Panel Features
A. Heat Preservation and Insulation
With the panel, no heat preservation measures are needed. Therefore, the construction cost will be significantly decreased. In addition, the building requires less energy consumption.
B. Fireproof Performance
The 15cm thick AAC panel can resist fire for at least 4 hours, and no radioactive substance or harmful gas will be produced. This panel is extensively used to the application where excellent fire resistance is required, for instance, the factories of steel structure.
C. Perfect Resistance to Shock
The lightweight ACC panel of high intensity applies the special joint design and installation method, to make sure the excellent shock resistance of the buildings. For this reason, it is commonly found in the seismic zone.
D. Convenient Construction
The dry construction method is used for the AAC panel. It needs short construction period. With this method, you can save about 80 Yuan for per square meter.
E. Larger Indoor Area
Unlike the wall made of autoclaved aerated concrete blocks, the AAC panel wall is at least 50mm less in thickness.
Performance Index Unit ALC Test Value Test Standard Standard Value
Dry Volume Density Kg/m2 512 GB/T11970-1997 ±50
Cubic Crushing Strength(Average Value) Mpa ≥4.0 GB/T11971-1997 ≥2.5
Drying Shrinkage mm/m ≤0.3 GB/T11972-1997 ≤0.8
Thermal Coefficient (5 %moisture content) W/m.k 0.11 GB/T10295-88 0.15
Freezing Resistance Quality Loss % 1.0 GB/T11973-1997 ≤5.0
Intensity after Frozen Mpa ≥3.8   ≥2.0
Shock Resistance (No cracks will be formed after the pendulum impact of 30Kg sand bag) time ≥7.0 JC666-1997 3
Single-point Hanging Force N 1200 (100mm thick) JC666-1997 ≥800
    1500 (125mm thick)    
Bonding Strength Between Rebar and ALC Panel Mpa Average Value 3.5 Mini. Value 2.8 GB/T15762-1995 ≥0.8 ≥0.5
Fire Endurance of ALC Panel hour 100mm thick wall
3.62
125mm thick wall
>4.0
GB/T T9978-1999  
Fire Endurance of 50mm Thick ALC Panel Protected Steel Column hour >4.0 GB/T T9978-1999 4
Fire Endurance of 50mm Thick ALC Panel Protected Girder hour >3.0 GB/T T9978-1999 3
R /R Water Softening Coefficient % 0.88 GB/T11970-1997  
Average Sound Reduction Index 100mm thick ALC panel+ both putty painted sides dB 40.8 GBJ75-84 GBJ121-88
 
 
Send your message to this supplier
Avatar
Miss Selena Sun
General Manager
*From:
To: Miss Selena Sun
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now