| Certification: | ISO9001/SGS/Ce |
|---|---|
| Type: | Autoclaved Aerated Concrete |
| Overseas Office: | India, Indonesia, Vietnam, Russia |
| Brand: | Dongyue |
| Hollow Block Appearance: | Multi-Row Flat Hole |
| Block Usage: | High-Rise Building Mansion |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier Top supplier of new and used concrete aac block machinery plant with autoclave for sale
Top supplier of new and used concrete aac block machinery plant with autoclave for sale Introduction
AAC (Autoclaved aerated concrete) block Main raw materials of AAC are siliceous material (sand, fly ash and Silicon tailings) and Calcium materials (lime and cement) mixed with foaming agent (aluminum powder). It is the product of light porous silicate through the following processes: batching, mixing, pouring, hardening, cutting, autoclaving and curing etc. Because of large amount of well-distributed tiny pores after foaming, it is named autoclaved aerated concrete.
AAC Classification In general, it can be classified according to the types of raw materials, manufacture process and functions. Based on the shape of AAC products, it can be divided into: AAC blocks and AAC panels. It is a revolutionary material offering an unique combination of high durability and strength, low weight, excellent heat insulation, fire resistant, noise absorption, unprecedented build ability and superior ecological green features. In China, AAC is one of the light wall materials which was popularized and applied at the earliest and the most widely.
Material dealing process
Put the fly ash or sand into the ball mill to mill via the conveyor belt, after milling, put the slurry into the slurry storage tank by slurry pump.
The lime, cement will convey by conveyor to the dry powder measure scale to scale separately. The slurry convey by slurry pump then to the automatic scale;the power and slurry put into the mixer,pouring into the mould.
After slurry pouring into the mould, put the mould box into the curing room with 5070. After 2-3 hours curing,the blocks become solid
Using reversal crane carry the mould and block to demould on cutting cart. The cutting cart will take the block to level cutting machine,vertical cutting ,two sides cutting,and remove the top waste material.
Finished cutting using semi-product crane carry to the front of autoclave grouped,hoisting machine or dragger will drag steam trolley into autoclave to steam,it need 10-12 hours.
Finished product out of autoclave,with separting machine to separate layer by layer.
Using finished block carry hanger clamp the finished product to package line on wooden pallets,after package, then by forklift transport the finished products to piled yard according to specifications to stack.
1.General AAC block plant equipment transport with 40HQ container.
2.The ball mill transport with 40OT or transposrt with 40FR according the size.
3.The autoclave main body transport by car on port,and hoist on deck of ship.
4.Cutting machine usually transport with 40FR.
5.Our package with wooden box,suitable for sea transport.
|
Type
|
TU groove brick
|
Flat brick without groove
|
|
Length(mm)
|
600
|
600
|
|
Thickness(mm)
|
75,100,125,150,200,250,300
|
75,100,125,150,200,250,300
|
|
Height(mm)
|
240,300,400
|
240,300,400
|
AAC Block compression strength of cuber meter
|
Volume density level
|
B06
|
B05
|
B04
|
|
|
desiccated density(kg/m3)
|
≤625
|
≤525
|
≤425
|
|
|
Strength level
|
A5.0
|
A3.5
|
A2.0
|
|
|
Drying shrinkage date
|
0.5
|
0.4
|
0.4
|
|
|
Freezing resistance
|
quality loss %
|
≤5.0
|
≤4.0
|
≤3.0
|
|
Strength after freezing(Mpa)
|
≥4.0
|
≥2.8
|
≥0.6
|
|
|
Dry coefficient of thermal conductivity
[W/(mk)] |
≤0.16
|
≤0.14
|
≤0.12
|
|
Top supplier of new and used concrete aac block machinery plant with autoclave for sale material description
Fly-Ash:A lot has been said about this raw material in this Project Profile itself. But this Raw material is freely available in Thermal Power plants. There are no taxes on this item whatsoever. Transportation charges are only to be attended by the entrepreneur.
Sand (65-70%): the core raw material of AAC product; the main resource of silica-aluminum components; correspond with JC409-91; the clay should less than 4%
Lime(12-20%):one of the main raw materials of fly ash AAC; the main effect is to provide efficient calcium oxide with cooperation of cement making calcium oxide react with SiO2Al2O3 in hot water then to produce calcium silicate hydrate. Therefore, lime is also the main resource of strength. Effective calcium oxide of lime should not less than 65%, over 80% is perfect and should accord with JC/T621-1996.
Cement(8-10%): This Project aims to utilize OPC cement as main binder material. It will give faster strength to the bricks, besides giving improved consistent quality. It also ensures a better cost effectiveness for the same. Using OPC will be a standardized practice. The other prime advantages of using OPC (compared to other binders) is it's easy availability locally through nationwide Retail Network of Cement Companies.
Gypsum(1-2%):Gypsum is the foaming regulator in AAC which dispels quicklime and postpones slurry's densification.CaSO4 should be more than 70%.
Aluminum Podwer(0.074%):it is the forming agent type and recommendation for supply depend on raw materials and mix formula
Dongyue Machinery Group was built in 1994,and now Dongyue is a national large-scale designated building materials machinery manufacturer, a coalition of researching, producing and marketing, and services with registered asset of 234 million RMB, total asset of 1 billion RMB, total area of 1,332,000square meters, and over 1500 staff.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}