Hot Selling Qt40-3A 6 Inch and 9 Inch Hollow Block Production Line

• Certification: ISO/Ce/SGS/Pvoc/SGS
• Type: Egg Laying Concrete Block Making Machine
• Automatic: Yes
• Brick Raw Material: Concrete
• Moving Method: Automatic
• Processing: Brick Production Line
• Model NO.: QT40-3A
• Dimension(L*W*H): 1800X1400X1100mm
• Machine Material: Q235r Steel
• Voltage: 220V/240V/380V/415V
• After-Sales Service Provided: Overseas Service Center Available
• Block Raw Material: Cement/Flyash/Sand/Gravel
• Capacity: 320PCS/H(420X200X200mm)
• Transport Package: Packed by Plywood Box
• Trademark: Dongyue small hollow block making machine
• Origin: Shandong, China (Mainland)

Product Description

                                   QT40-3A 6 inch and 9 inch hollow block production line in nigeria  detail

 

Dongyue Machinery Group is leading block machine manufactuer in China.Our main products are Various automatic and manual concrete block machine,AAC Block machine,ALC block machine,Sand lime block machine and pressure vessel.Our proudcts has been exported to more than 60 countries.
 

(1) QT40-3A small hollow block making machine Main technical parameters:

Host machine power		5.2KW
Moulding cycle		25S
Dimension of host machine		1800×1400×1100mm
Pallet size		No need pallets
Weight of the host machine		0.8T
Vibration force		35.5KN
Mixer model		JD350
Voltage		380V
General water Consumption		2T/every day
Workers		2
Workshop area		50m2
Product	Hollow 400X200X200mm	4 pcs/mould	4500/8hours
	Standard 240X115X53mm	16pcs/mould	15000/8hours
	Hollow 400X150X200mm	5 pcs/mould	6000/8hours

 

2) QT40-3A small hollow block making machine operation process

 

Step1.The prepared material should be put into the mold box dustpan by the Material car.

 

Step2.press the 3 BUTTON and at the same time let the material flat.

 

Step3.press the4 BUTTON on the mold advance to the next mold decoupling above the same time.

 

Step4.press the BUTTON 5 when the up-mould at it's position ,at the same time put the hydraulic control lever forth. At this step ,the down mould will be rise ,it will be make the brick shape successfully.

 

Step5.after the in shape ,the machine will forth automatically and stop the moving automatically,then make the hydraulic control level back in order to make the down mould drop on the groud.

 

Step6.press the BUTTON6 make the up mould on the back ,then put the material by car in cycle.

 

 

3.QT40-3A   small hollow block making machine Daily Maintenance

1.Before producing block, test run the machine without material for 2-5 minutes,if the machine works properly,start to produce with raw material in case that there is obstacles during production.

2.Prohibit to repair machine during production process,must cut the electricity firstly,then check machine.

3.The machine components are metal,keep the machine in dry shelter,avoid to use in raining days.Intense sunshine can also reduce the machine life span.

4.Clean up the mould area after production,check bolts tight or not,oil lubrication on the main parts to keep the machine flexible.Prohibit to add lubrication during production.

 

4.QT40-3A   small hollow block making machine Raw material formula

1.cement 10%

2.Sand 40%

3.Agitator 50%(diameter<8mm)

4.3% of water