Light Weight AAC Block Machine
1, Introduction of aac blocks
Areated concrete block (light block)produced by light weight aac block machine is the light and porous building material. It has light keeping temperature cant burn and other advantages. It can be made into many kinds of bricks for example: 600× 200× 100, 80× 80× 180, 240× 115× 53, 600× 200× 125)
Areated concrete common conception Common concrete density is usually 1600-2400kg/m3, but Areated concrete are 500kg/m3, 600kg/m3, 700kg/m3. Light weight aac block machine has not the big grain, main use silicon material (for example: Coal ash, sand, stone dust and others ), through making the material small for example sand, they can be used directly if has enough degree of small (for example coal ash. Mixing calcium material lime cement water to a special slop, then add the aluminum dust and the additive. Make the aluminum dust and the special slop have a Chemical reflect. Then produce Hydrogen to make the concrete slop to expanding or swell, foam. Next, put them into the curing room to concreting cutting steaming curing, last, there will become the light brick, the porous rate is 70-80%.
2, main features
1. Light weight, Areated concrete density is usually 400-700kg/m3, (according the market in produce ), same as 1/3 of clay block and 1/5 common concrete. So use the Light block can reduce the weight of the build more, and also reduce the beam of roof and pillar press best. Then you can see, it can save the material and cost, it also fighting shaking.
2...Keeping temperature It has many are porous, the delivery hearting coefficient is 0.9-0.22W/(mk), the same as 1/4 or 1/5 of clay brick, so it is best materials now in the world.
Have many kinds material, have lowest waste
Main Material: Coal ash sand waste mine material coal stonestone dust and other silicon materials. <o: P>
(1 )Product weight is according to 600kg/m3 to control.
(2 )annual capacity 200, 000M3.
(3) set raw material proportion: Cement 6.5%, raw lime 23%, flyash 68%, gypsum 3%, aluminum paste powder 350g/M3.
(4) water and material rate 0.631
(5) one mould product 2.88M3<o: P>
(6) Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes. <o: P>
(7) casting slurry temperature 38-42 degree<o: P>
(8) body quiet stop. Time is 1.5-2.5housr, temperature 50-<o: P>
90 degree, after quiet stop body strength is 0.15-0.18Mpa<o: P>
Steam curing cycle time, come in and out autoclave about 0.5hour, steam curing cycle time about is 6 hours/1.6Mpa, total 6.5 hours.
Sand Autoclaved Aerated Concrete AAC Block Plant( Mould)
1. Sand Autoclaved Aerated Concrete AAC Block Plant Name meaning scope
AAC Block Machine also called light weight block making machine, is a new building area equipment, the name means the block should use autoclave to steam and become foam concrete, then used in light weight purpose.
2. Sand Autoclaved Aerated Concrete AAC Block Plant Simple introduction
AAC block (light block) is the light and porous buidling material. The areated concrete block has light keeping temperature cant burn and other advantages. It can be made into many kinds of bricks(for example: 600× 200× 100, 80× 80× 180, 240× 115× 53, 600× 200× 125), they could be used industry building and common building. They are more and more popular in the world.
3. Sand Autoclaved Aerated Concrete AAC Block Plant common conception
Common concrete density is usually 1600-2400kg/m3, but Areated concrete are 500kg/m3, 600kg/m3, 700kg/m3. It has not the big grain, main use silicon material (for example: Coal ash, sand, stone dust and others ), through making the material small for example sand, they can be used directly if has enough degree of small (for example coal ash. Mixing calcium material lime cement water to a special slop, then add the aluminum dust and the additive. Make the aluminum dust and the special slop have a Chemical reflect. Then produce Hydrogen to make the concrete slop to expanding or swell, foam. Next, put them into the curing room to concreting cutting steaming curing, last, there will bacome the light brick, the porous rate is 70-80%.
4. Sand Autoclaved Aerated Concrete AAC Block Plant Advantages
1) light weight
Autoclave Aerated Concrete Block density is usually 400-700kg/m3, (according the market in produce ), same as 1/3 of clay brick and 1/5 common concrete. So use the Light brick can reduce the weight of the build more, and also reduce the beam of roof and pillar press best. Then you can see, it can save the material and cost, it also fighting shaking.
2) keeping temperature
Autoclave aerated concrete block has many are porous, the delivery hearting coefficient is 0.9-0.22W/(mk), the same as 1/4 or 1/5 of clay brick, so it is best materials now in the world.
Have many kinds material, have lowest waste
3) autoclaved aerated concrete block Main Material
Coal ash sand waste mine material coal stonestone dust and other silicon materials.
4)Name scope
AAC block machine line, AAC brick machine line, aerated concrete block machine, aerated concrete brick machine, light weight brick machine, aerated concrete production line, AAC aerated concrete block machine, autoclaved aerated concrete block plant, autoclaved aerated concrete block machine, autoclaved aerated brick machine line, AAC producion line, AAC production plant. Aerated block machine line, aerated brick machine line, aerated production line, aerated block production plant.
Our product:
Our project:
The aac plant as the new material has been used widely in construction like: school,hospital, apartment.
Core machine :
Our company :
Our certificate:
Audited Supplier 
){kind=link}